
Plat sur votre visage
Un nouvel ajout à la gamme de galetage de cogsdill est le Diamond burnish face Mill Tool (DBFM) pour le brunissage des faces planes pour obtenir des finitions de surface supérieures.
Grâce à notre géométrie éprouvée d’insertion de diamants, notre gamme haut de gamme d’outils de brunissement peut atteindre de faibles finitions de surface RA, en coulant à froid les sommets dans les vallées en un seul passage – obtenir des résultats impossibles à obtenir de tout autre processus d’enlèvement des métaux.
Simple et efficace, les outils DBFM de Cogsdill sont conçus pour produire des finitions de miroir sur n’importe quelle surface; des aciers au carbone aux aciers à outils, à la fonte aux alliages et à la plupart des métaux ferreux et non ferreux.
La mise en place et l’exploitation sont relativement simples, aucune compétence particulière de l’opérateur n’est requise.
Tous les outils sont fournis par la capacité de refroidissement, mais alors que l’outil doit être utilisé avec du liquide de refroidissement, aucun liquide de refroidissement spécial n’est nécessaire. Les huiles droites, les huiles solubles et les liquides de refroidissement synthétiques peuvent être utilisés pour fournir la lubrification nécessaire.
Opération outil DBFM
1 | The Cogsdill Diamond Burnish Face Mill tool is mounted to a standard milling arbor which fits into the spindle of any machining centre. |
2 | The diamond burnishing inserts are brought into contact with the workpiece perpendicular to the surface being finished. |
3 | The tool is then fed into the workpiece an additional .002 to .004 inch (.05 to .10 mm) to allow the diamond inserts to disengage from the stops in the holders. |
4 | The internal springs, with their adjustable preloads, force the multiple diamonds against the workpiece. |
5 | The continually rotating tool is then fed along the surface of the workpiece which produces a mirror-like finish. |
6 | Although the tools are supplied with pre-loaded spring pressures, they can be adjusted if required, depending upon material specification. |
Les outils de Brunissage diamant de Surface sont polyvalents
- Designed to fit in your CNC machining center, with a common interface to suit industry-standard milling arbors.
- The tools can be used on both large and small areas, and are ideal for short production runs. The Diamond Burnish Face Mill Tool can produce quality finishes on interrupted surfaces, such as a face of a flange having a series of bolt holes or a keyway.
- The tools are supplied pre-loaded, but the spring pressure can be adjusted to ensure consistent pressure on the face of the component, assuring repeatability from part to part.
- Spare diamond inserts are easily replaced and available from stock. The premium quality and replaceable diamond burnishing insert is polished and contoured to provide superior finishes and long tool life.
- Although the diamond nibs are qualified, Cogsdill recommended replacing nibs as a set.





A Fond. Finition miroir.
Travaillez dur pour obtenir une finition supérieure en une seule passe. Brûlez les surfaces planes sans effort.








Une gamme standard d’outils est disponible.
S’il vous plaît contactez-nous pour la livraison.
Spécifications standard de l’outil

Tool No | Size (mm) | A | B | C | No. of Nibs |
DBFM-63 | 63 | 89 | 90 | 27* | 5** |
DBFM-80 | 80 | 89 | 110 | 32* | 7** |
DBFM-100 | 100 | 89 | 130 | 40* | 7** |
DBFM-125 | 125 | 89 | 155 | 40* | 9** |
*Standard Face Mill Arbor Size
** Replacement Nib Code DB1-040Q
Résultats des tests
EN32
Burnishing Parameters | |
Speed | 1000 RPM |
Feed | 0.07 mm per diamond Insert |
Interference | 0.1 mm |
Milled Finish | 1.0 Ra |
Burnished Finish | 0.01 Ra |
Aluminum
Burnishing Parameters | |
Speed | 1000 RPM |
Feed | 0.07 mm per diamond Insert |
Interference | 0.1 mm |
Milled Finish | 0.9 Ra |
Burnished Finish | 0.03 Ra |
410 and 316 Stainless
Burnishing Parameters | |
Speed | 900 RPM |
Feed | 0.36 mm per diamond Insert |
Interference | 0.06 mm |
Milled Finish | 0.8 Ra |
Burnished Finish | <0.1 Ra |
Iron Remko TS14333
Burnishing Parameters | |
Speed | 900 RPM |
Feed | 0.10 mm per diamond Insert |
Interference | 0.06 mm |
Milled Finish | 0.4 Ra |
Burnished Finish | <0.03 Ra |
Pure Copper
Burnishing Parameters | |
Speed | 1,000 RPM |
Feed | 0.04 mm per diamond Insert |
Interference | 0.08 mm |
Milled Finish | 0.3 Ra |
Burnished Finish | <0.01 Ra |
Recommended starting point: 150 m/min & 0.1mm per diamond (500 SFM & 0.004 inch per diamond)